These TRANSLUCENT smooth, glossy, glass fibre veneer sheets with pressure sensitive 3M adhesive backing are ideal for scratch & scuff protection. The pressure sensitive 3M adhesive allows for the removal of the veneer.
Our 0.25mm glass veneer is an ultra-thin possessing paper card like stiffness, translating into an ultra flexible thin sheet with the ability to conform to the tightest of curves (~10 mm radii) or tubes as small as 35 mm diameter. These sheets are premium quality and best suited as translucent scratch, scuff and impact protection where it is desirable that substrate underneath is visible.
The 0.5 mm thick glass veneer can be used were the substrate underneath is not completely smooth (as roughness can show through on 0.25mm) and where more protection of your substrate is required. Note though that the 0.5mm will not be as flexible as the 0.25mm.
The sheet possess a mirror like gloss finish on one side and a matte finish on the other to enable optimum bonding. The gloss side is covered in a removable protective film that will help prevent marking/scratching and maintain the glossy surface finish when you’re cutting and finishing the sheet for your application.
Mirror gloss finish
Scratch protection film
Multiple uses for road car and motorsport applications
Scuff & Scratch protection where it is desirable that the colour of the substrate below is visible. Translucent veneers are removable/replaceable making them well suited to rally or off-road applications that expose the body work of vehicle to scuff damage from trees & bushes.
Dimensions & Tolerances
Thickness: Available in various from 0.25 mm+/-0.05 mm to 0.5 mm+/-0.05 mm
Dimensions: Available in various sizes up to 2440 x 1200 mm +/-2.0 mm.
This sheet is very flexible and will require additional backing support to maintain its shape. For advice on selecting the correct thickness please check out our Thickness Selection Guide.
Quality & Performance Guarantee
Our FLEXIBLE translucent glass sheets are 100% pinhole free and are a perfect choice for adhering to smooth flat and curved surfaces. Our sheets produce a sleek, flawless, sophisticated look with amazing depth that we guarantee cannot be bettered.
Cutting, Shaping & Finishing
This ultra-thin carbon fibre sheet can be cut with standard tools including scissors, craft knife, guillotine or scalpel where you must always wear appropriate eye protection when cutting. Finally, for more information check out our Composite Cutting & Finishing Guide in our Technical Support pages.